
How one-sided and two-sided surface treatments are described in JEFF’s legacy article about coated anti-reflective glass.
The Coating Principle
The source describes treating one or both sides of glass to reduce reflection. It quotes reflectance below 1%, compared with approximately 4% per side and approximately 8% total spectral reflectance for ordinary glass. Actual values depend on the coating, wavelength and measurement conditions.
Light and Image Quality
The article also quotes a peak visible-light transmission of 99%, average transmission above 95%, average reflectance below 4% and a minimum below 0.5%. It describes reduced washed-out images under strong light, improved LCD/PDP brightness and colour contrast, and lower ultraviolet transmission.
Durability and Appearance
Further source claims include temperature resistance above 500°C versus 80°C for ordinary acrylic; coating hardness above 7H versus 2H–3H for PC sheet; resistance to acidic and alkaline cleaners; and impact performance of 3 mm glass comparable to 6 mm acrylic. The article describes good flatness, preservation of the viewing angle and limited hot/cold deformation. These historical generalisations require product-specific technical verification and do not establish a JEFF performance guarantee.