The Difference Between Laminated Glass and Tempered Glass
Glass Insights
Laminated glass and tempered glass are two common safety glasses, but their principles, performance and application scenarios are significantly different. This article analyzes the differences between the two from key aspects such as core characteristics, safety and functions, helping you to better understand their uses.
Principles and Structure
Comparison
Laminated glass
Tempered glass
Definition
Two or more glass panes bonded with a PVB or SGP interlayer under heat and pressure.
Glass heated to 600–700°C and rapidly cooled to create compressive surface stress.
Structure
Glass + interlayer + glass; a multilayer composite.
A single pane with redistributed internal stress and no interlayer.
Production priorities
Interlayer adhesion and edge sealing.
Heat-treatment temperature and cooling rate.
Safety Comparison
Comparison
Laminated glass
Tempered glass
Breakage
The source describes fragments remaining attached to the interlayer in a spiderweb pattern, reducing scattering.
The source describes blunt fragments of up to 5 mm, with some possibility of scattering; additional film may improve retention.
Standards cited by the original article
GB 9962 for laminated glass; the article refers to high-rise buildings and vehicle windscreens.
GB 15763.2 for tempered glass; the article quotes a spontaneous breakage rate of approximately 0.3–3‰.
Intrusion resistance
The multilayer construction is more difficult to penetrate, making it suitable for banks and jewellery shops.
More impact resistant than ordinary glass, but concentrated loading can break the entire pane; less resistant to penetration than laminated glass.
Functional Performance
Comparison
Laminated glass
Tempered glass
Acoustics
The interlayer absorbs sound energy. The source gives approximately 29 dB for 3 + 0.76 + 3 laminated glass versus approximately 15 dB for a single tempered pane.
Similar to ordinary glass alone; an insulating cavity can improve acoustic performance.
Thermal performance
The article describes partial infrared blocking by PVB/SGP and further improvement when combined with Low-E glass.
Coatings such as Low-E or an insulating construction are needed to improve thermal performance.
Impact
The source quotes 3–5 times ordinary glass and describes SGP laminated strength as 2–5 times that of PVB laminated glass.
The source quotes 3–5 times ordinary glass, while noting complete breakage under concentrated impact.
Weathering and UV
The source quotes an interlayer service life exceeding 25 years and 99% UV blocking for quality PVB/SGP products, depending on interlayer type.
Generally stable, but inclusions such as nickel sulphide can cause spontaneous breakage; UV protection requires a coating or another process.
Typical Applications
Field
Laminated glass
Tempered glass
Buildings
High-rise full-height or outward-opening windows; roadside buildings requiring noise control; rooflights exposed to hail or impact.
Interior partitions, glass railings, lower-floor windows with suitable safety measures, and panes used in insulating glass units.
Transport
Windscreens, with GB 7258 cited by the source; high-speed train and aircraft windows requiring pressure and acoustic performance.
Side and rear vehicle windows, including tempered laminated constructions.
Special uses
Multilayer SGP security glazing, glass walkways, swimming-pool barriers and museum display cases.
Shower enclosures with protective film, glass tables and furniture such as refrigerator shelves.
Energy efficiency
Low-E laminated combinations for light transmission and thermal control.
Low-E tempered insulating glass with an air cavity.
Maintenance and Cost
Comparison
Laminated glass
Tempered glass
Care
Avoid strong acids and alkalis; inspect edge seals for water ingress and delamination.
Protect corners and edges from sharp impacts and remain alert to spontaneous breakage.
Indicative prices quoted in the original article
Approximately RMB 200–300/m² for a 5 + 1.14 + 5 construction.
Approximately RMB 80–150/m² for a single tempered pane; complex insulating constructions may approach laminated-glass costs.
Repair
Replace the complete damaged pane; the interlayer cannot be repaired separately.
Replace the complete damaged pane; local repairs are not applicable.
Choosing a Construction
The source favours laminated glass for high-rise buildings, children's areas, busy public spaces, roadside or airport-adjacent buildings, museums, archives and security applications. Tempered glass is presented as a cost-conscious option for lower-floor windows, interior decoration, furniture and components of insulating units. Combined options include tempered laminated glass, such as 8 mm tempered + 1.52 mm SGP + 8 mm tempered, and tempered insulating laminated glass for tall buildings or cold climates. Selection depends on the setting, budget and required performance.