Sealed Cavity
Agree the cavity and spacer configuration.
Sealed multi-pane assemblies for facade projects balancing thermal, acoustic and visual requirements.
01 / APPLICATION OVERVIEW
The brochure describes insulating glass as two or more panes enclosing a dry, sealed cavity with a spacer and desiccant. Facade design must coordinate the glass, edge seal, drainage and supporting frame. Page 27 records a Korean office-building reference using 24 mm insulating glass and 11.52 mm laminated glass; these are historical project descriptions, not a universal unit construction. Current cavity dimensions, coatings, gas fill and performance must be confirmed for each specification.

Company brochure p.27, Korean office-building reference. The photograph does not identify the build-up of every visible panel.
Agree the cavity and spacer configuration.
Review seals, drainage and compatibility at the facade edge.
Verify thermal, acoustic and solar targets for the actual unit.
02 / PROJECT ESSENTIALS
Provide facade sections, glass and frame targets, cavity and edge-seal requirements, drainage details and installation conditions.
Confirm the selected substrate, glass build-up, processing route and material compatibility.
Submit project-specific performance targets and the documents needed to verify them; no generic certification is implied.
Coordinate framing, supports, seals, joints, drainage and installation tolerances.

03 / RELATED GLASS

Laminated glass is made by placing a PVB interlayer between glass sheets in a clean assembly room, preheating and pressing the assembly, and processing it in an autoclave. The supplied company catalogue describes fragment retention, resistance to intrusion, ultraviolet protection and sound insulation. Performance depends on the selected construction; the catalogue is not a specification for every configuration.
Share your facade concept, drawings and performance requirements with our team.